| identifier_product_doi_authority: | http://dx.doi.org/ |
| identifier_product_doi: | 10.5067/2XH9OYPVF3A3 |
| FootprintGeometry_footprint_altitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Description: Altitude of the footprint center based on Earth topography Type: Float32 origname: footprint_altitude fullnamepath: /FootprintGeometry/footprint_altitude |
| FootprintGeometry_footprint_altitude_uncert: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Description: Uncertainty of the source Earth topography data Type: Float32 origname: footprint_altitude_uncert fullnamepath: /FootprintGeometry/footprint_altitude_uncert |
| FootprintGeometry_footprint_aspect: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Orientation of the surface slope relative to the ground track Type: Float32 origname: footprint_aspect fullnamepath: /FootprintGeometry/footprint_aspect |
| FootprintGeometry_footprint_azimuth: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Angle between the LOS as defined from the footprint location to the spacecraft, and the footprint location local north direction Type: Float32 origname: footprint_azimuth fullnamepath: /FootprintGeometry/footprint_azimuth |
| FootprintGeometry_footprint_land_fraction: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Type: Float32 Minimum: 0.000000000 Maximum: 100.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Percent Description: Percentage of land surface type within the footprint origname: footprint_land_fraction fullnamepath: /FootprintGeometry/footprint_land_fraction |
| FootprintGeometry_footprint_latitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: -90.00000000 Maximum: 90.00000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Geodetic latitude of the footprint center based on Earth topography Type: Float32 origname: footprint_latitude fullnamepath: /FootprintGeometry/footprint_latitude |
| FootprintGeometry_footprint_latitude_geoid: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: -90.00000000 Maximum: 90.00000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Geodetic latitude of the footprint based on standard geoid Type: Float32 origname: footprint_latitude_geoid fullnamepath: /FootprintGeometry/footprint_latitude_geoid |
| FootprintGeometry_footprint_longitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Longitude of the footprint center based on Earth topography Type: Float32 origname: footprint_longitude fullnamepath: /FootprintGeometry/footprint_longitude |
| FootprintGeometry_footprint_longitude_geoid: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Longitude of the footprint based on standard geoid Type: Float32 origname: footprint_longitude_geoid fullnamepath: /FootprintGeometry/footprint_longitude_geoid |
| FootprintGeometry_footprint_o2_qual_flag: | Array of 16 bit Unsigned integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: Bit flags indicating the quality of the ABO2 data in footprint: 0 - Good, non-zero - see documentation Type: IntBitfield16 origname: footprint_o2_qual_flag fullnamepath: /FootprintGeometry/footprint_o2_qual_flag |
| FootprintGeometry_footprint_plane_fit_quality: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Description: Goodness of fit - standard deviation of the points to which the plane is fitted, with the expected values taken as the orthogonal projection of the points onto the plane Type: Float32 origname: footprint_plane_fit_quality fullnamepath: /FootprintGeometry/footprint_plane_fit_quality |
| FootprintGeometry_footprint_polarization_angle: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: The angle between the accepted polarization axis of the instrument and the instrument reference plane for polarization, defined as the plane formed by the LOS and the ray from the footprint location to the local zenith Type: Float32 origname: footprint_polarization_angle fullnamepath: /FootprintGeometry/footprint_polarization_angle |
| FootprintGeometry_footprint_slope: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Slope of a plane fit to points within the footprint Type: Float32 origname: footprint_slope fullnamepath: /FootprintGeometry/footprint_slope |
| FootprintGeometry_footprint_solar_azimuth: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Angle between the solar direction as defined from the footprint location to the sun, and the footprint location local north direction Type: Float32 origname: footprint_solar_azimuth fullnamepath: /FootprintGeometry/footprint_solar_azimuth |
| FootprintGeometry_footprint_solar_zenith: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Angle between the solar direction as defined from the footprint location to the sun, and the footprint location local zenith direction Type: Float32 origname: footprint_solar_zenith fullnamepath: /FootprintGeometry/footprint_solar_zenith |
| FootprintGeometry_footprint_stokes_coefficients: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim3 = 0..3] Shape: Frame_Sounding_Spectrum_StokesCoefficient_Array Description: Weighting factors applied to the Stokes parameters calculated by the radiative transfer code to compute the radiance Type: Float32 origname: footprint_stokes_coefficients fullnamepath: /FootprintGeometry/footprint_stokes_coefficients |
| FootprintGeometry_footprint_strong_co2_qual_flag: | Array of 16 bit Unsigned integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: Bit flags indicating the quality of the SCO2 data in footprint: 0 - Good, non-zero - see documentation Type: IntBitfield16 origname: footprint_strong_co2_qual_flag fullnamepath: /FootprintGeometry/footprint_strong_co2_qual_flag |
| FootprintGeometry_footprint_surface_roughness: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Description: Standard deviation of the altitude within the footprint Type: Float32 origname: footprint_surface_roughness fullnamepath: /FootprintGeometry/footprint_surface_roughness |
| FootprintGeometry_footprint_time_string: | Array of Strings [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Description: Data acquisition time for the center of footprint (yyyy-mm-ddThh:mm:ss.mmmZ) Type: FixLenStr origname: footprint_time_string fullnamepath: /FootprintGeometry/footprint_time_string |
| FootprintGeometry_footprint_time_tai93: | Array of 64 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Seconds Description: Data acquisition time for the center of footprint in seconds since Jan. 1, 1993 Type: Float64 origname: footprint_time_tai93 fullnamepath: /FootprintGeometry/footprint_time_tai93 |
| FootprintGeometry_footprint_vertex_altitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim3 = 0..3] Minimum: -500.0000000 Maximum: 15000.00000 Shape: Frame_Sounding_Spectrum_Vertex_Array Units: Meters Description: Altitude of the footprint vertices using Earth topography Type: Float32 origname: footprint_vertex_altitude fullnamepath: /FootprintGeometry/footprint_vertex_altitude |
| FootprintGeometry_footprint_vertex_latitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim3 = 0..3] Minimum: -90.00000000 Maximum: 90.00000000 Shape: Frame_Sounding_Spectrum_Vertex_Array Units: Degrees Description: Geodetic latitude of the footprint vertices using Earth topography Type: Float32 origname: footprint_vertex_latitude fullnamepath: /FootprintGeometry/footprint_vertex_latitude |
| FootprintGeometry_footprint_vertex_longitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim3 = 0..3] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Frame_Sounding_Spectrum_Vertex_Array Units: Degrees Description: Longitude of the footprint vertices using Earth topography Type: Float32 origname: footprint_vertex_longitude fullnamepath: /FootprintGeometry/footprint_vertex_longitude |
| FootprintGeometry_footprint_weak_co2_qual_flag: | Array of 16 bit Unsigned integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: Bit flags indicating the quality of the WCO2 data in footprint: 0 - Good, non-zero - see documentation Type: IntBitfield16 origname: footprint_weak_co2_qual_flag fullnamepath: /FootprintGeometry/footprint_weak_co2_qual_flag |
| FootprintGeometry_footprint_zenith: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Frame_Sounding_Spectrum_Array Units: Degrees Description: Angle between the LOS as defined from the footprint location to the spacecraft, and the footprint location local zenith direction Type: Float32 origname: footprint_zenith fullnamepath: /FootprintGeometry/footprint_zenith |
| FootprintMeteorology_footprint_gph_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field PHIS (surface geopotential height), divided by standard gravity Type: Float32 origname: footprint_gph_met fullnamepath: /FootprintMeteorology/footprint_gph_met |
| FootprintMeteorology_footprint_meteorology_flag: | Array of 32 bit Integers [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Minimum: 0 Maximum: 4 Shape: Frame_Sounding_Spectrum_Array Description: Integer flag: 0: Good; 4: Bad Type: Signed32 origname: footprint_meteorology_flag fullnamepath: /FootprintMeteorology/footprint_meteorology_flag |
| FootprintMeteorology_footprint_ozone_profile_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim4 = 0..71] Shape: Frame_Sounding_Spectrum_MetLevel_Array Units: Kilograms Kilogram^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field O3 (ozone_mass_mixing_ratio) Type: Float32 origname: footprint_ozone_profile_met fullnamepath: /FootprintMeteorology/footprint_ozone_profile_met |
| FootprintMeteorology_footprint_skin_temperature_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Kelvins Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field TS (surface_skin_temperature) Type: Float32 origname: footprint_skin_temperature_met fullnamepath: /FootprintMeteorology/footprint_skin_temperature_met |
| FootprintMeteorology_footprint_specific_humidity_profile_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim4 = 0..71] Shape: Frame_Sounding_Spectrum_MetLevel_Array Units: Kilograms Kilogram^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field QV (specific_humidity) Type: Float32 origname: footprint_specific_humidity_profile_met fullnamepath: /FootprintMeteorology/footprint_specific_humidity_profile_met |
| FootprintMeteorology_footprint_surface_pressure_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Pascals Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field PS (surface_pressure) Type: Float32 origname: footprint_surface_pressure_met fullnamepath: /FootprintMeteorology/footprint_surface_pressure_met |
| FootprintMeteorology_footprint_temperature_profile_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim4 = 0..71] Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field T (air_temperature) Type: Float32 Shape: Frame_Sounding_Spectrum_MetLevel_Array Units: Kelvins origname: footprint_temperature_profile_met fullnamepath: /FootprintMeteorology/footprint_temperature_profile_met |
| FootprintMeteorology_footprint_total_column_water_vapor_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Kilograms Meter^{-2} Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field TQV (total_precipitable_water_vapor) Type: Float32 origname: footprint_total_column_water_vapor_met fullnamepath: /FootprintMeteorology/footprint_total_column_water_vapor_met |
| FootprintMeteorology_footprint_two_meter_temperature_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Kelvins Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field T2M (2-meter_air_temperature) Type: Float32 origname: footprint_two_meter_temperature_met fullnamepath: /FootprintMeteorology/footprint_two_meter_temperature_met |
| FootprintMeteorology_footprint_vector_pressure_levels_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2][FakeDim4 = 0..71] Type: Float32 Shape: Frame_Sounding_Spectrum_MetLevel_Array Units: Pascals Description: Model pressure values on which temperature_profile_met, specicific_humidity_profile_met, and ozone_profile_met are reported origname: footprint_vector_pressure_levels_met fullnamepath: /FootprintMeteorology/footprint_vector_pressure_levels_met |
| FootprintMeteorology_footprint_windspeed_u_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Second^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field U10M (10-meter_eastward_wind) Type: Float32 origname: footprint_windspeed_u_met fullnamepath: /FootprintMeteorology/footprint_windspeed_u_met |
| FootprintMeteorology_footprint_windspeed_v_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim2 = 0..2] Shape: Frame_Sounding_Spectrum_Array Units: Meters Second^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx V10M (10-meter_northward_wind) Type: Float32 origname: footprint_windspeed_v_met fullnamepath: /FootprintMeteorology/footprint_windspeed_v_met |
| Metadata_AcquisitionMode: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The instrument mode in which the data in the product were collected. Valid values are: 'Glint', 'Nadir', 'Target', 'Sample Dark Calibration', 'Sample Lamp Calibration', 'Sample Solar/limb Calibration', 'Single-Pixel Dark Calibration', 'Single-Pixel Lamp Calibration', 'Single-Pixel Solar/limb Calibration' Type: VarLenStr origname: AcquisitionMode fullnamepath: /Metadata/AcquisitionMode |
| Metadata_ActualFrames: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: Actual number of frames reported in this product Type: Signed32 origname: ActualFrames fullnamepath: /Metadata/ActualFrames |
| Metadata_AncillaryDataDescriptors: | Array of Strings [FakeDim3 = 0..3] Shape: AncFile_Array Description: The file names of the ancillary data files that were used to generate this product (ancillary data sets include all input files except for the primary input files) Type: VarLenStr origname: AncillaryDataDescriptors fullnamepath: /Metadata/AncillaryDataDescriptors |
| Metadata_AscendingEquatorCrossingDate: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The date of the equator crossing of the spacecraft ground track in the ascending direction Type: FixLenStr origname: AscendingEquatorCrossingDate fullnamepath: /Metadata/AscendingEquatorCrossingDate |
| Metadata_AscendingEquatorCrossingLongitude: | Array of 32 bit Reals [FakeDim5 = 0..0] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Scalar Units: Degrees Description: The longitude of the equator crossing of the spacecraft ground track in the ascending direction Type: Float32 origname: AscendingEquatorCrossingLongitude fullnamepath: /Metadata/AscendingEquatorCrossingLongitude |
| Metadata_AscendingEquatorCrossingTime: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The time of the equator crossing of the spacecraft ground track in the ascending direction Type: FixLenStr origname: AscendingEquatorCrossingTime fullnamepath: /Metadata/AscendingEquatorCrossingTime |
| Metadata_BuildId: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The ID of build which included the software that created this product Type: VarLenStr origname: BuildId fullnamepath: /Metadata/BuildId |
| Metadata_CollectionLabel: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: Label of the data collection containing this product Type: VarLenStr origname: CollectionLabel fullnamepath: /Metadata/CollectionLabel |
| Metadata_DataFormatType: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 'NCSA HDF' - A character string that describes the internal format of the data product. Type: FixLenStr origname: DataFormatType fullnamepath: /Metadata/DataFormatType |
| Metadata_EphemerisType: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The source of the spacecraft ephemeris data that were utilized to generate this data file Type: VarLenStr origname: EphemerisType fullnamepath: /Metadata/EphemerisType |
| Metadata_EquatorCrossingDate: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The date of the equator crossing of the spacecraft ground track in the descending direction Type: FixLenStr origname: EquatorCrossingDate fullnamepath: /Metadata/EquatorCrossingDate |
| Metadata_EquatorCrossingLongitude: | Array of 32 bit Reals [FakeDim5 = 0..0] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Scalar Units: Degrees Description: The longitude of the equator crossing of the spacecraft ground track in the descending direction Type: Float32 origname: EquatorCrossingLongitude fullnamepath: /Metadata/EquatorCrossingLongitude |
| Metadata_EquatorCrossingTime: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The time of the equator crossing of the spacecraft ground track in the descending direction Type: FixLenStr origname: EquatorCrossingTime fullnamepath: /Metadata/EquatorCrossingTime |
| Metadata_ExpectedFrames: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: Nominal number of frames in this product Type: Signed32 origname: ExpectedFrames fullnamepath: /Metadata/ExpectedFrames |
| Metadata_GapStartTime: | Array of Strings [FakeDim5 = 0..0] Shape: Gap_Array Description: The timestamp after which a nonexistent, unnecessary, spurious, questionable, or erroneous data segment begins Type: FixLenStr origname: GapStartTime fullnamepath: /Metadata/GapStartTime |
| Metadata_GapStopTime: | Array of Strings [FakeDim5 = 0..0] Shape: Gap_Array Description: The timestamp before which a nonexistent, unnecessary, spurious, questionable, or erroneous data segment ends Type: FixLenStr origname: GapStopTime fullnamepath: /Metadata/GapStopTime |
| Metadata_GranulePointer: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The filename of this product Type: VarLenStr origname: GranulePointer fullnamepath: /Metadata/GranulePointer |
| Metadata_HDFVersionId: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 5.x' - A character string that identifies the version of the HDF (Hierarchical Data Format) software that was used to generate this data file Type: VarLenStr origname: HDFVersionId fullnamepath: /Metadata/HDFVersionId |
| Metadata_InputPointer: | Array of Strings [FakeDim6 = 0..4] Shape: InputPtr_Array Description: A pointer to one or more data granules that provide the major input that was used to generate this product. Type: VarLenStr origname: InputPointer fullnamepath: /Metadata/InputPointer |
| Metadata_InstrumentShortName: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: OCO-2' - The name of the instrument that collected the telemetry data Type: VarLenStr origname: InstrumentShortName fullnamepath: /Metadata/InstrumentShortName |
| Metadata_LongName: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: A complete descriptive name for the data type of this product Type: VarLenStr origname: LongName fullnamepath: /Metadata/LongName |
| Metadata_ModeCounter: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The Nth occurrence of this particular mode for this orbit, indicated by letter ('a', 'b', 'c', 'd', etc.) Type: FixLenStr origname: ModeCounter fullnamepath: /Metadata/ModeCounter |
| Metadata_OperationMode: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The two-letter abbreviation of the AcquisitionMode: GL, ND, TG, DS, LS, SS, BS, NP, GP, TP, DP, LP, SP, BP, XS, XP, MS, MP, SB Type: FixLenStr origname: OperationMode fullnamepath: /Metadata/OperationMode |
| Metadata_OrbitEccentricity: | Array of 32 bit Reals [FakeDim5 = 0..0] Shape: Scalar Description: The eccentricity of the spacecraft orbital path Type: Float32 origname: OrbitEccentricity fullnamepath: /Metadata/OrbitEccentricity |
| Metadata_OrbitInclination: | Array of 32 bit Reals [FakeDim5 = 0..0] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Scalar Units: Degrees Description: The angle between the plane of the spacecraft orbital path and the Earth equatorial plane Type: Float32 origname: OrbitInclination fullnamepath: /Metadata/OrbitInclination |
| Metadata_OrbitParametersPointer: | Array of Strings [FakeDim7 = 0..1] Shape: OrbitParamPtr_Array Description: The data files that provided the orbit parameters used to generate this product Type: VarLenStr origname: OrbitParametersPointer fullnamepath: /Metadata/OrbitParametersPointer |
| Metadata_OrbitPeriod: | Array of 32 bit Reals [FakeDim5 = 0..0] Shape: Scalar Units: Seconds Description: The time span between two consecutive descending node crossings Type: Float32 origname: OrbitPeriod fullnamepath: /Metadata/OrbitPeriod |
| Metadata_OrbitSemiMajorAxis: | Array of 32 bit Reals [FakeDim5 = 0..0] Shape: Scalar Units: Meters Description: The length of the semimajor axis of the spacecraft orbit Type: Float32 origname: OrbitSemiMajorAxis fullnamepath: /Metadata/OrbitSemiMajorAxis |
| Metadata_OrbitStartDate: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The date of the equator crossing of the spacecraft nadir track in the descending direction Type: FixLenStr origname: OrbitStartDate fullnamepath: /Metadata/OrbitStartDate |
| Metadata_OrbitStartLongitude: | Array of 32 bit Reals [FakeDim5 = 0..0] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Scalar Units: Degrees Description: The longitude of the equator crossing of the spacecraft ground track in the descending direction Type: Float32 origname: OrbitStartLongitude fullnamepath: /Metadata/OrbitStartLongitude |
| Metadata_OrbitStartTime: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The time of the equator crossing of the spacecraft ground track in the descending direction Type: FixLenStr origname: OrbitStartTime fullnamepath: /Metadata/OrbitStartTime |
| Metadata_PlatformLongName: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 'Orbiting Carbon Observatory 2' Type: VarLenStr origname: PlatformLongName fullnamepath: /Metadata/PlatformLongName |
| Metadata_PlatformShortName: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 'OCO-2' Type: VarLenStr origname: PlatformShortName fullnamepath: /Metadata/PlatformShortName |
| Metadata_PlatformType: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 'spacecraft' - The type of platform associated with the instrument which acquires the accompanying data Type: VarLenStr origname: PlatformType fullnamepath: /Metadata/PlatformType |
| Metadata_ProcessingLevel: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: Indicates data level (Level 0, Level 1A, Level 1B, Level 2) in this product Type: VarLenStr origname: ProcessingLevel fullnamepath: /Metadata/ProcessingLevel |
| Metadata_ProducerAgency: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 'NASA' - Identification of the agency that provides the project funding Type: VarLenStr origname: ProducerAgency fullnamepath: /Metadata/ProducerAgency |
| Metadata_ProducerInstitution: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: 'JPL' - Identification of the institution that provides project management. Type: VarLenStr origname: ProducerInstitution fullnamepath: /Metadata/ProducerInstitution |
| Metadata_ProductionDateTime: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The date and time at which the product was created (yyyy-mm-ddThh:mm:ss.mmmZ) Type: FixLenStr origname: ProductionDateTime fullnamepath: /Metadata/ProductionDateTime |
| Metadata_ProductionLocation: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: Facility in which this file was produced, typically: 'Operations Pipeline', 'Operations Pipeline 2', 'Science Computing Facility', 'Test Pipeline', Test Pipeline 2' Type: VarLenStr origname: ProductionLocation fullnamepath: /Metadata/ProductionLocation |
| Metadata_ProductionLocationCode: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: One-letter code indicating the ProductionLocation, typically: ' ' - Operations Pipelines (1) or 2, 's' - Science Computing Facility, 't' - Test Pipelines (1) or 2 Type: FixLenStr origname: ProductionLocationCode fullnamepath: /Metadata/ProductionLocationCode |
| Metadata_ProjectId: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: OCO-2' - The project identification string Type: VarLenStr origname: ProjectId fullnamepath: /Metadata/ProjectId |
| Metadata_QAGranulePointer: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: A pointer to the quality assessment product that was generated with this product Type: VarLenStr origname: QAGranulePointer fullnamepath: /Metadata/QAGranulePointer |
| Metadata_RangeBeginningDate: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The date on which the earliest data contained in the product were acquired (yyyy-mm-dd) Type: FixLenStr origname: RangeBeginningDate fullnamepath: /Metadata/RangeBeginningDate |
| Metadata_RangeBeginningTime: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The time at which the earliest data contained in the product were acquired (hh:mm:ss.mmmZ) Type: FixLenStr origname: RangeBeginningTime fullnamepath: /Metadata/RangeBeginningTime |
| Metadata_RangeEndingDate: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The date on which the latest data contained in the product were acquired (yyyy-mm-dd) Type: FixLenStr origname: RangeEndingDate fullnamepath: /Metadata/RangeEndingDate |
| Metadata_RangeEndingTime: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The time at which the latest data contained in the product were acquired (hh:mm:ss.mmmZ) Type: FixLenStr origname: RangeEndingTime fullnamepath: /Metadata/RangeEndingTime |
| Metadata_ReportedSoundings: | Array of 16 bit Integers [FakeDim1 = 0..7] Minimum: 0 Maximum: 1 Shape: SoundingPosition_Array Description: Indicates the inclusion of each footprint in the data: 0 - not included, 1 - included Type: Signed8 origname: ReportedSoundings fullnamepath: /Metadata/ReportedSoundings |
| Metadata_SISName: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The name of the document describing the contents of the product Type: VarLenStr origname: SISName fullnamepath: /Metadata/SISName |
| Metadata_SISVersion: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The version of the document describing the contents of the product Type: VarLenStr origname: SISVersion fullnamepath: /Metadata/SISVersion |
| Metadata_ShortName: | Array of Strings [FakeDim5 = 0..0] Shape: Scalar Description: The short name identifying the data type of this product Type: VarLenStr origname: ShortName fullnamepath: /Metadata/ShortName |
| Metadata_SizeMBECSDataGranule: | Array of 32 bit Reals [FakeDim5 = 0..0] Shape: Scalar Description: The size of this data granule in Megabytes Type: Float32 Units: Megabytes origname: SizeMBECSDataGranule fullnamepath: /Metadata/SizeMBECSDataGranule |
| Metadata_SpectralChannel: | Array of Strings [FakeDim2 = 0..2] Shape: Spectrum_Array Description: A description of the spectral channels used for the measurements Type: VarLenStr origname: SpectralChannel fullnamepath: /Metadata/SpectralChannel |
| Metadata_StartOrbitNumber: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: The first orbit on which data contained in the product were acquired Type: Signed32 origname: StartOrbitNumber fullnamepath: /Metadata/StartOrbitNumber |
| Metadata_StartPathNumber: | Array of 32 bit Integers [FakeDim5 = 0..0] Minimum: 1 Maximum: 233 Shape: Scalar Description: The first WRS path on which data contained in the product was collected Type: Signed32 origname: StartPathNumber fullnamepath: /Metadata/StartPathNumber |
| Metadata_StopOrbitNumber: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: The last orbit on which data contained in the product were acquired Type: Signed32 origname: StopOrbitNumber fullnamepath: /Metadata/StopOrbitNumber |
| Metadata_StopPathNumber: | Array of 32 bit Integers [FakeDim5 = 0..0] Minimum: 1 Description: The last WRS path on which data contained in the product was collected Maximum: 233 Shape: Scalar Type: Signed32 origname: StopPathNumber fullnamepath: /Metadata/StopPathNumber |
| Meteorology_gph_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field PHIS (surface geopotential height), divided by standard gravity Type: Float32 origname: gph_met fullnamepath: /Meteorology/gph_met |
| Meteorology_meteorology_flag: | Array of 32 bit Integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0 Maximum: 4 Shape: Frame_Sounding_Array Description: Integer flag: 0: Good; 4: Bad Type: Signed32 origname: meteorology_flag fullnamepath: /Meteorology/meteorology_flag |
| Meteorology_ozone_profile_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim4 = 0..71] Shape: Frame_Sounding_MetLevel_Array Units: Kilograms Kilogram^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field O3 (ozone_mass_mixing_ratio) Type: Float32 origname: ozone_profile_met fullnamepath: /Meteorology/ozone_profile_met |
| Meteorology_skin_temperature_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Kelvins Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field TS (surface_skin_temperature) Type: Float32 origname: skin_temperature_met fullnamepath: /Meteorology/skin_temperature_met |
| Meteorology_specific_humidity_profile_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim4 = 0..71] Shape: Frame_Sounding_MetLevel_Array Units: Kilograms Kilogram^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field QV (specific_humidity) Type: Float32 origname: specific_humidity_profile_met fullnamepath: /Meteorology/specific_humidity_profile_met |
| Meteorology_surface_pressure_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Pascals Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field PS (surface_pressure) Type: Float32 origname: surface_pressure_met fullnamepath: /Meteorology/surface_pressure_met |
| Meteorology_temperature_profile_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim4 = 0..71] Shape: Frame_Sounding_MetLevel_Array Units: Kelvins Description: Interpolated from GEOS-5 FP-IT inst3_3d_asm_Nv field T (air_temperature) Type: Float32 origname: temperature_profile_met fullnamepath: /Meteorology/temperature_profile_met |
| Meteorology_total_column_water_vapor_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Kilograms Meter^{-2} Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field TQV (total_precipitable_water_vapor) Type: Float32 origname: total_column_water_vapor_met fullnamepath: /Meteorology/total_column_water_vapor_met |
| Meteorology_two_meter_temperature_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Kelvins Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field T2M (2-meter_air_temperature) Type: Float32 origname: two_meter_temperature_met fullnamepath: /Meteorology/two_meter_temperature_met |
| Meteorology_vector_pressure_levels_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7][FakeDim4 = 0..71] Shape: Frame_Sounding_MetLevel_Array Units: Pascals Description: Model pressure values on which temperature_profile_met, specicific_humidity_profile_met, and ozone_profile_met are reported Type: Float32 origname: vector_pressure_levels_met fullnamepath: /Meteorology/vector_pressure_levels_met |
| Meteorology_windspeed_u_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Second^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx field U10M (10-meter_eastward_wind) Type: Float32 origname: windspeed_u_met fullnamepath: /Meteorology/windspeed_u_met |
| Meteorology_windspeed_v_met: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Second^{-1} Description: Interpolated from GEOS-5 FP-IT inst3_2d_asm_Nx V10M (10-meter_northward_wind) Type: Float32 origname: windspeed_v_met fullnamepath: /Meteorology/windspeed_v_met |
| MeteorologyDiagnostics_ak: | Array of 32 bit Reals [FakeDim4 = 0..71] Shape: MetLevel_Array Units: Pascals Description: a-coefficient in hybrid-sigma relationship Pl_i = a_i + b_i * Psurf, where Pl = vector_pressure_levels_met and Psurf= surface_pressure_met. Taken from GEOS5-FP-IT v5.12.4. Type: Float32 origname: ak fullnamepath: /MeteorologyDiagnostics/ak |
| MeteorologyDiagnostics_bk: | Array of 32 bit Reals [FakeDim4 = 0..71] Shape: MetLevel_Array Description: b-coefficient in hybrid-sigma relationship Pl_i = a_i + b_i * Psurf, where Pl = vector_pressure_levels_met and Psurf= surface_pressure_met. Taken from GEOS5-FP-IT v5.12.4. Type: Float32 origname: bk fullnamepath: /MeteorologyDiagnostics/bk |
| SoundingGeometry_sounding_altitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Altitude of the sounding based on Earth topography Type: Float32 origname: sounding_altitude fullnamepath: /SoundingGeometry/sounding_altitude |
| SoundingGeometry_sounding_altitude_uncert: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Uncertainty of the source Earth topography data Type: Float32 origname: sounding_altitude_uncert fullnamepath: /SoundingGeometry/sounding_altitude_uncert |
| SoundingGeometry_sounding_aspect: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Orientation of the surface slope relative to the local North Type: Float32 origname: sounding_aspect fullnamepath: /SoundingGeometry/sounding_aspect |
| SoundingGeometry_sounding_azimuth: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Angle between local North and the projection of the LOS onto the Earth based on topography Type: Float32 origname: sounding_azimuth fullnamepath: /SoundingGeometry/sounding_azimuth |
| SoundingGeometry_sounding_center_offset_o2_weak_co2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Distance between the ABO2 band footprint center and the WCO2 band footprint center Type: Float32 origname: sounding_center_offset_o2_weak_co2 fullnamepath: /SoundingGeometry/sounding_center_offset_o2_weak_co2 |
| SoundingGeometry_sounding_center_offset_strong_co2_o2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Distance between the SCO2 band footprint center and the ABO2 band footprint center Type: Float32 origname: sounding_center_offset_strong_co2_o2 fullnamepath: /SoundingGeometry/sounding_center_offset_strong_co2_o2 |
| SoundingGeometry_sounding_center_offset_weak_co2_strong_co2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Distance between the WCO2 band footprint center and the SCO2 band footprint center Type: Float32 origname: sounding_center_offset_weak_co2_strong_co2 fullnamepath: /SoundingGeometry/sounding_center_offset_weak_co2_strong_co2 |
| SoundingGeometry_sounding_land_fraction: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 100.0000000 Shape: Frame_Sounding_Array Units: Percent Description: Percentage of land surface type within the sounding Type: Float32 origname: sounding_land_fraction fullnamepath: /SoundingGeometry/sounding_land_fraction |
| SoundingGeometry_sounding_land_water_indicator: | Array of 16 bit Integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0 Maximum: 3 Shape: Frame_Sounding_Array Description: Surface type at the sounding location: 0 - Land, 1 - Water, 2 - unused, 3 - Mixed land water Type: Signed8 origname: sounding_land_water_indicator fullnamepath: /SoundingGeometry/sounding_land_water_indicator |
| SoundingGeometry_sounding_latitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: -90.00000000 Maximum: 90.00000000 Shape: Frame_Sounding_Array Units: Degrees Description: Geodetic latitude of the sounding based on Earth topography Type: Float32 origname: sounding_latitude fullnamepath: /SoundingGeometry/sounding_latitude |
| SoundingGeometry_sounding_latitude_geoid: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: -90.00000000 Maximum: 90.00000000 Shape: Frame_Sounding_Array Units: Degrees Description: Geodetic latitude of the sounding based on standard geoid Type: Float32 origname: sounding_latitude_geoid fullnamepath: /SoundingGeometry/sounding_latitude_geoid |
| SoundingGeometry_sounding_longitude: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Longitude of the sounding based on Earth topography Type: Float32 origname: sounding_longitude fullnamepath: /SoundingGeometry/sounding_longitude |
| SoundingGeometry_sounding_longitude_geoid: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: -180.0000000 Maximum: 180.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Longitude of the sounding based on standard geoid Type: Float32 origname: sounding_longitude_geoid fullnamepath: /SoundingGeometry/sounding_longitude_geoid |
| SoundingGeometry_sounding_operation_mode: | Array of Strings [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: The two-letter abbreviation of the science AcquisitionMode: GL, ND, TG, XS Type: FixLenStr origname: sounding_operation_mode fullnamepath: /SoundingGeometry/sounding_operation_mode |
| SoundingGeometry_sounding_overlap: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 100.0000000 Shape: Frame_Sounding_Array Units: Percent Description: Union in area of all three band footprints relative to average area of all three band footprints Type: Float32 origname: sounding_overlap fullnamepath: /SoundingGeometry/sounding_overlap |
| SoundingGeometry_sounding_overlap_o2_weak_co2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 100.0000000 Shape: Frame_Sounding_Array Units: Percent Description: Union in area of the footprints of band one and two relative to the average area of the two footprints Type: Float32 origname: sounding_overlap_o2_weak_co2 fullnamepath: /SoundingGeometry/sounding_overlap_o2_weak_co2 |
| SoundingGeometry_sounding_overlap_strong_co2_o2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 100.0000000 Shape: Frame_Sounding_Array Units: Percent Description: Union in area of the footprints of band one and three relative to the average area of the two footprints Type: Float32 origname: sounding_overlap_strong_co2_o2 fullnamepath: /SoundingGeometry/sounding_overlap_strong_co2_o2 |
| SoundingGeometry_sounding_overlap_weak_co2_strong_co2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 100.0000000 Shape: Frame_Sounding_Array Units: Percent Description: Union in area of the footprints of band two and three relative to the average area of the two footprints Type: Float32 origname: sounding_overlap_weak_co2_strong_co2 fullnamepath: /SoundingGeometry/sounding_overlap_weak_co2_strong_co2 |
| SoundingGeometry_sounding_plane_fit_quality: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Goodness-of-fit of surface slope: the standard deviation of the points, to which the plane is fitted, with the expected values taken as the orthogonal projection of the points onto the plane Type: Float32 origname: sounding_plane_fit_quality fullnamepath: /SoundingGeometry/sounding_plane_fit_quality |
| SoundingGeometry_sounding_polarization_angle: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Angle between the accepted polarization axis of the instrument and the instrument reference plane for polarization, defined as the plane formed by the LOS and the ray from the sounding location to the local zenith Type: Float32 origname: sounding_polarization_angle fullnamepath: /SoundingGeometry/sounding_polarization_angle |
| SoundingGeometry_sounding_relative_velocity: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Second^{-1} Description: Velocity of the spacecraft along the LOS: positive indicates spacecraft moving toward sounding location Type: Float32 origname: sounding_relative_velocity fullnamepath: /SoundingGeometry/sounding_relative_velocity |
| SoundingGeometry_sounding_slant_path_diff_o2_weak_co2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Difference in slant path between ABO2 and WCO2 footprints Type: Float32 origname: sounding_slant_path_diff_o2_weak_co2 fullnamepath: /SoundingGeometry/sounding_slant_path_diff_o2_weak_co2 |
| SoundingGeometry_sounding_slant_path_diff_strong_co2_o2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Difference in slant path between SCO2 and ABO2 footprints Type: Float32 origname: sounding_slant_path_diff_strong_co2_o2 fullnamepath: /SoundingGeometry/sounding_slant_path_diff_strong_co2_o2 |
| SoundingGeometry_sounding_slant_path_diff_weak_co2_strong_co2: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Difference in slant path between WCO2 and SCO2 footprints Type: Float32 origname: sounding_slant_path_diff_weak_co2_strong_co2 fullnamepath: /SoundingGeometry/sounding_slant_path_diff_weak_co2_strong_co2 |
| SoundingGeometry_sounding_slope: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Slope of a plane fit to points within the sounding Type: Float32 origname: sounding_slope fullnamepath: /SoundingGeometry/sounding_slope |
| SoundingGeometry_sounding_solar_azimuth: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 360.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Angle between local North and the projection of the solar angle onto the Earth at the sounding location based on topography Type: Float32 origname: sounding_solar_azimuth fullnamepath: /SoundingGeometry/sounding_solar_azimuth |
| SoundingGeometry_sounding_solar_distance: | Array of 64 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Distance between sounding location and the Sun Type: Float64 origname: sounding_solar_distance fullnamepath: /SoundingGeometry/sounding_solar_distance |
| SoundingGeometry_sounding_solar_relative_velocity: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Second^{-1} Description: Velocity of the Sun along the sounding location/Sun vector: negative indicates Sun moving toward sounding location Type: Float32 origname: sounding_solar_relative_velocity fullnamepath: /SoundingGeometry/sounding_solar_relative_velocity |
| SoundingGeometry_sounding_solar_zenith: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Angle between the normal to the Earth geoid and the solar angle at the sounding location based on topography Type: Float32 origname: sounding_solar_zenith fullnamepath: /SoundingGeometry/sounding_solar_zenith |
| SoundingGeometry_sounding_surface_roughness: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Meters Description: Standard deviation of the altitude within the sounding Type: Float32 origname: sounding_surface_roughness fullnamepath: /SoundingGeometry/sounding_surface_roughness |
| SoundingGeometry_sounding_time_string: | Array of Strings [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: Data acquisition time for the sounding based upon the three footprint times (yyyy-mm-ddThh:mm:ss.mmmZ) Type: FixLenStr origname: sounding_time_string fullnamepath: /SoundingGeometry/sounding_time_string |
| SoundingGeometry_sounding_time_tai93: | Array of 64 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Units: Seconds Description: Data acquisition time for the sounding based upon the three footprint times in seconds since Jan. 1, 1993 Type: Float64 origname: sounding_time_tai93 fullnamepath: /SoundingGeometry/sounding_time_tai93 |
| SoundingGeometry_sounding_zenith: | Array of 32 bit Reals [FakeDim0 = 0..899][FakeDim1 = 0..7] Minimum: 0.000000000 Maximum: 180.0000000 Shape: Frame_Sounding_Array Units: Degrees Description: Angle between the normal to the Earth geoid and the LOS at the sounding location based on Earth topography Type: Float32 origname: sounding_zenith fullnamepath: /SoundingGeometry/sounding_zenith |
| Metadata_FirstSoundingId_Time: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: The ID of the first sounding in this file Type: Signed32 origname: FirstSoundingId_Time fullnamepath: /Metadata/FirstSoundingId |
| Metadata_FirstSoundingId_Date: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: The ID of the first sounding in this file Type: Signed32 origname: FirstSoundingId_Date fullnamepath: /Metadata/FirstSoundingId |
| Metadata_LastSoundingId_Time: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: The ID of the last sounding in this file Type: Signed32 origname: LastSoundingId_Time fullnamepath: /Metadata/LastSoundingId |
| Metadata_LastSoundingId_Date: | Array of 32 bit Integers [FakeDim5 = 0..0] Shape: Scalar Description: The ID of the last sounding in this file Type: Signed32 origname: LastSoundingId_Date fullnamepath: /Metadata/LastSoundingId |
| SoundingGeometry_sounding_id_Time: | Array of 32 bit Integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: Unique identifier for each sounding Type: Signed32 origname: sounding_id_Time fullnamepath: /SoundingGeometry/sounding_id |
| SoundingGeometry_sounding_id_Date: | Array of 32 bit Integers [FakeDim0 = 0..899][FakeDim1 = 0..7] Shape: Frame_Sounding_Array Description: Unique identifier for each sounding Type: Signed32 origname: sounding_id_Date fullnamepath: /SoundingGeometry/sounding_id |